Roof sheathing cleaning
Growth on the underside of the roof deck is removed by blasting or sanding, followed by HEPA vacuuming of the attic.
Attic mold almost never comes from a single leak. Call Breffni Remediation and we'll connect you with an independent attic mold pro in Pacifica who removes the growth and fixes the airflow problem underneath it.
Warm, moist air from bathrooms, kitchens, and living spaces leaks into the attic, hits cold roof sheathing, and condenses. Without enough ventilation, that moisture feeds mold on the underside of the roof deck.
Answered day and night, holidays too.

Here's what separates a real attic fix from a quick spray job.

Each part of the job, from blasting to new baffles, is priced in writing before work begins.
Dry ice and soda blasting lift growth off roof decking without soaking the wood, and HEPA vacuums and air scrubbers handle the dust and spores that come loose.
Need it done before closing or before new shingles go on? Tell the dispatcher and we'll prioritize your call.
Attic work means walking joists, working near wiring, and sometimes cutting new vents. The pros we route you to carry their own insurance and required licensing.
Attic work combines cleaning overhead with fixing how air moves through the house. These are the core services.
Growth on the underside of the roof deck is removed by blasting or sanding, followed by HEPA vacuuming of the attic.
Exhaust fans that dump humid air into the attic are one of the most common causes. Ducts are extended and terminated through a roof or wall cap so moisture leaves the house.
Proper attic airflow needs open intake at the eaves and exhaust at the ridge. Contractors restore that balance.
Contaminated blown cellulose or batts may need removal. Air sealing around top plates, recessed lights, plumbing stacks, and the attic hatch cuts the warm air leaking up from the house.
A protective coating can go on once the decking is clean and dry, as an added layer rather than a shortcut.

Four steps, with photos from up top.
Tell us what you or your inspector saw, whether it's stained sheathing, frost, or drips from nails, and we'll connect you with an attic contractor near Pacifica.
The pro checks the sheathing, ventilation, insulation depth, exhaust duct terminations, and roof penetrations, taking photos along the way.
The quote shows what needs cleaning and what needs fixing so it stays clean.
Decking is cleaned, exhaust routed outside, vents restored, and the job finishes with before-and-after photos you can share with a buyer or insurer.

One free call gets a local attic mold pro to take a look.
Get Help Today: +1-844-326-4757
A few recent attic jobs.

The home inspector flagged black staining on the north side of the roof. The contractor found both bathroom fans venting straight into the attic. They dry ice blasted the decking and ran the ducts out through roof caps.
Every winter we'd get water spots on the bedroom ceiling. Frost was building on the nail tips and melting. They cleared the soffits, installed baffles, and sealed around the can lights. No spots this year.
A new roof was already on the schedule, so the contractor cleaned the sheathing first and coordinated with the roofer on adding a ridge vent. Good timing saved us a second trip.
The before-and-after photos kept our sale on track. The buyer's agent had questions and the report answered every one of them.
Usually warm, humid air from the house condensing on cold roof sheathing, made worse by exhaust fans venting into the attic, blocked soffit vents, or poor air sealing. Roof leaks are another cause.
It can still damage the roof deck and insulation, and it often becomes an issue when you sell.
Usually not. Most stained sheathing can be cleaned. Replacement is only needed when the wood is soft, delaminated, or structurally compromised.
It's a method that fires dry ice pellets at the surface to knock off growth. The dry ice turns into gas, leaving no water or grit behind, which suits attic sheathing well.
No. Bath and kitchen exhaust should be ducted all the way outside through a roof or wall cap. Venting into the attic is one of the most common causes of attic mold.
Most attic jobs take one to three days, depending on attic size, access, the cleaning method, and how many ventilation corrections are needed.
We route attic mold calls from across Pacifica to independent contractors who understand local roof styles and climate.
Common Pacifica service zip codes include 94044.
Nearby cities we also serve sit in the list below.
Check Coverage: +1-844-326-4757